Fuchs Cassida Fluid GLE 150 - Foodgrade

CASSIDA FLUID GLE 150 Performance, Features & Benefits:

Certified by NSF for ISO 21469 and registered by NSF (Class H1) for use where there is potential for incidental food contact. Products contain only substances permitted under US 21 CFR 178.3570, 178.3620 and 182 for use in lubricants with incidental food contact.

• + The fully synthetic base fluid has been selected for its ability to provide superior lubrication under variety of applications
• + CASSIDA FLUID GLE 150 is specially formulated to provide excellent lubrication even when operating in locations where it is subject to contamination with water, juice and food, which is held in suspension, thus protecting metal surfaces from wear and corrosion
• + Excellent separation properties, from water, in oil recirculating and filtration systems
• + Neutral odour and taste
• + Good anti-oxidant properties. Resists the formation of deposits and sludge even at elevated temperatures resulting in long oil and equipment life
   

Seal & Paint Compatibility of CASSIDA FLUID GLE 150

Compatible with the elastomers, gaskets, seals and paints, such as poly-urethane and two part epoxy resin paints, frequently used on machinery and in lubrication systems employed in the food processing industry.
 

Synthetic lubricant

• Does not contain natural products derived from animals or genetically modified organisms (GMO)
• Does not contain any allergenic or intoleranceinducing substances as specified in Annex IIIa of EC directive 2003/89/EC
• Suitable for use where vegetarian and ‘nutfree’ food is prepared
• Biostatic; does not promote the growth of bacteria or fungal organisms
   

Approvals & Recommendations

This is an ongoing process, please contact your local partner for any updates.
 

Specifications & Certificates

• NSF H1 registered
• ISO 21469 certified
• Kosher
• Halal
• DIN 51517 CLP
   

"Incidental Food contact"

Registered by NSF (Class H1) and meets the USDA H1 guidelines (1998) for lubricants for use where there is a potential for incidental food contact. Certified by NSF for ISO 21469, Safety of machinery, Lubricants with incidental product contact, Hygiene requirements. Made only from substances permitted under the US FDA Title 21 CFR 178.3570, 178.3620 and/or those generally regarded as safe (US 21 CFR 182) for use in food grade lubricants. To comply with the requirements of US 21 CFR 178.3570, contact with food should be avoided where possible. In the case of incidental food contact, the concentration of this product in the food must not exceed 10 parts per million (10mg/kg of foodstuff). In locations and/or applications where local legislation does not specify maximum concentration limits, it is recommended that this same 10 ppm limit be observed, as up to this concentration CASSIDA FLUID GLE 150 will not impart undesirable taste, odour or colour to food, nor will cause adverse health effects. Consistent with good manufacturing practice, use only the amount necessary to achieve correct lubrication and take appropriate corrective action should excessive incidental contact with food be detected.
 

Protect the environment

Take used lubricants and empty packs to an authorised collection point.

Health & Safety

Based on information available, CASSIDA FLUID GLE 150 is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personal hygiene are maintained. As for all oils, prolonged or repeated contact with the skin should be avoided. For further information refer to the appropriate Material Safety Data Sheet.
 

Handling & storage

All food grade lubricants should be stored separately from other lubricants, chemical substances and foodstuffs and out of direct sunlight or other heat sources. Store between 0°C and 40°C. Provided that the product has been stored under these conditions we recommend that the product be used within 5 years from the date of manufacture. Accept for use new CASSIDA FLUID GLE 150 only if the manufacturer's seal is intact. Before opening the pack ensure the area around the closure is clean. It is recommended that it be cleaned with potable water and then dried with a clean cloth before opening. Record the date the seal was broken. To prevent product contamination, always close the package after use. Upon opening a pack, the product must be used within 2 years (or within 5 years of date of manufacture, whichever is the sooner).

If you have any questions, please contact OlieOnline Technical Helpdesk
 

Typical Physical Characteristics of CASSIDA FLUID GLE 150

Is Shell Cassida Fluid GLE 150 the same as Fuchs Cassida Fluid GLE 150?

Fuchs Cassida are speciality lubricants designed for use in the food industry. Fuchs Cassida products have the same properties as Shell Cassida because Fuchs acquired Shell's food-safe line in 2008. They are widely used in the food and beverage industry. However, it is important to choose the right lubricant based on the specific application and equipment requirements.

What is the viscosity of Fuchs Cassida Fluid GLE 150 and how is it affected?

Fuchs Cassida Fluid GLE 150 has a kinematic viscosity of 150 mm²/s at 40°C. Viscosity can be affected by several factors, including operating temperature, machine component loads and the type of equipment used. At higher temperatures, the viscosity of the fluid will decrease, while at higher loads the viscosity may increase. It is important to choose the right viscosity for the specific application to ensure optimum lubrication.

Where can I buy Fuchs Cassida Fluid GLE 150?

OlieOnline is the largest online lubricant webshop with only worldwide known brands including Fuchs Cassida Fluid GLE 150. OlieOnline customers appreciate the convenience and time-saving of being able to buy lubricants online 24/7 at a competitive price. Questions no problem: Knowledge is our strength! www.olieonline.co.uk