Klüber Klüberalfa MR 3-500

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Your benefit: pallet advantage from 2 barrels

97% supplied in 5 working days

How we ship

Incoterms DAP

Bank transfer or Credit Card (master card & visa) payment

Overview

Klüber Klüberalfa MR 3-500

Universal sliding fluid for seals, guideways and plastic friction points

Application Klüber Klüberalfa MR 3-500

Due to its good compatibility, Klüberalfa MR 3 may be used in combination with most materials, e.g. leather, textile or plastic, in car interiors or on the car body. Klüberalfa MR 3 is compatible with most thermoplastics or thermosetting plastics used, for example, in dashboards, seat and sunroof sliding rails, arm rests, seat adjustment mechanisms, door and sunroof seals. Perfluorinated polyether oils are generally regarded as neutral towards elastomers and plastics (possible exception: highly fluorinated rubber). Nevertheless we recommend testing compatibility with the material to be used, especially prior to series application.

Details

Performance, Features & Benefits of Klüber Klüberalfa MR 3-500 are:

Reduced noise and optimised friction
Can be combined with numerous material combinations
Easy and reliable application

If you have any questions, please contact OlieOnline Technical Helpdesk

Product Description Klüber Klüberalfa MR 3-500

Car manufacturers are confronted with the need to prevent creaking noises (NVH requirements), in particular when a new vehicle model is being launched. The sliding fluids Klüberalfa MR 3 based on PFPE are resistant to evaporation and were specifically developed for NVH requirements and lifetime lubrication. They offer a less expensive alternative to other noise-reducing products such as films or adhesive tapes. Klüberalfa MR 3 products are highly compatible with most elastomers and plastics. Due to their being visually neutral, they can be used for applications in car interiors as well as in other industrial sectors. Klüberalfa MR 3 is available in three different viscosities and supplied in a pump spray dispenser that does not release greenhouse gases. It is easy to use in economically small quantities and does not give off combustible or flammable solvent vapours. The product forms a homogeneous lubricating film.

Typical Characteristics

Product specifications		Method	Klüber Klüberalfa MR 3-500
Article number			090195
Chemical composition, type of oil			PFPE
Chemical composition, solvent			fluorinated solvent
Upper service temperature			200 °C / 392 °F
Appearance			clear
Density at	20 °C		approx. 1.55 g/ cm³
Pour point		DIN ISO 3016	<= -30 °C
Kinematic viscosity of the base oil,	40 °C	DIN 51562 pt. 01/ ASTM D-445/ASTM D 7042	approx. 395 mm²/s
Kinematic viscosity of the base oil	100 °C		approx. 38 mm²/ s
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.			24 months

Application notes

For optimum lubrication results, we recommend cleaning the friction points with white spirit 180/210 followed by Klüberalfa XZ 3-1 before using Klüberalfa MR 3 for the first time. Then blow the surfaces with clean, dry compressed air or hot air to remove white spirit residues. For initial lubrication, the friction points must be clean and bright, i.e. free from oil, grease, perspiration and contamination.

Product Questions

Customer Questions