Same day dispatchKlüber Klübersynth BEP 72-82
97% supplied in 5 working days
How we ship
Incoterms DAP
Bank transfer or Credit Card (master card & visa) payment
Klüber Klübersynth BEP 72-82
Rolling bearing grease for long-term lubrication
Application Klüber Klübersynth BEP 72-82
Klübersynth BEP 72-82 was especially developed for rolling bearings typically used in motor vehicles. Due to its performance characteristics Klübersynth BEP 72-82 can be used for the lifetime lubrication of many bearings, e.g. belt tensioner bearings (with rotating outer ring), clutch release bearings, viscous coupling bearings, drive shaft bearings, radiator fan bearings as well as deep groove ball bearings used in various types of electric motors and in all other bearings subject to high speeds and loads.
Performance, Features & Benefits of Klüber Klübersynth BEP 72-82 are:
- Long service life of bearing due to special antiwear additives protecting against premature material fatigue as may be caused by vibrations, high temperatures and speeds
- Protects against corrosion damage due to excellent additives
If you have any questions, please contact OlieOnline Technical Helpdesk
Product Description Klüber Klübersynth BEP 72-82
Klübersynth BEP 72-82 is based on polyurea and ester oil. The special additives were chosen with a view to preventing premature bearing failure due to material fatigue, which often occurs at high temperatures combined with high speeds and vibrations. The service life of bearings is extended owing to the lubricant's excellent, long-term corrosion protection characteristics.
Typical Characteristics
| Product specifications : | Klüber Klübersynth BEP 72-82 | |
| Article number | 094092 | |
| Chemical composition, thickener | polyurea | |
| Chemical composition, type of oil | ester oil | |
| Lower service temperature | -40 °C / -40 °F | |
| Upper service temperature | 180 °C / 356 °F | |
| Colour space | beige | |
| Density at 20 °C | approx. 0.90 g/cm³ | |
| Worked penetration, 25 °C, lower limit value | DIN ISO 2137 | 250 x 0.1 mm |
| Worked penetration, 25 °C, upper limit value | DIN ISO 2137 | 280 x 0.1 mm |
| Kinematic viscosity of the base oil, 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 80 mm²/s |
| Kinematic viscosity of the base oil, 100 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 11 mm²/s |
| Copper corrosion, (lubricating grease), 24h/100°C | DIN 51811 | 1 - 100 corrosion degree |
| Corrosion inhibiting properties of lubricating greases, based on DIN 51802, SKF-EMCOR, test duration: 1 week, 5 % NaCl solution |
<= 3 corrosion degree | |
| Drop point, | DIN ISO 2176, IP 396 | >= 250 °C |
| Speed factor (n x dm) |
|
1 000 000 mm/min |
| Flow pressure of lubricating greases, test temperature: -40 °C | DIN 51805 | <= 1 400 mbar |
| Water resistance, D 3 h/90 °C, rating | IN 51807 pt. 01 | <= 1 - 90 |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Application notes
Klübersynth BEP 72-82 can be applied to the bearing by standard metering systems as well as by simple equipment such as brush, spatula or grease gun. Ideally, the bearing should be metallically blank. The product is normally suitable for central lubricating systems. Please note, however, that due to different system configurations and application conditions the pumpability of the product has to be confirmed with the system manufacturer for each individual application. We will be pleased to provide assistance in this matter. If an anticorrosive fluid has been applied prior to greasing, we recommend checking compatibility with the lubricant.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
UK Deliveries
incoterm DAP
